|Indoor/outdoor usage||Recommended for both||UV lamination is recommended for outdoor usage.|
|Resistance to water||Good||Bleeding does not occur with incidental water contact. However, surface lamination is recommended in wet conditions to protect the outer coating. The base is waterproof.|
|Ink drying time||Immediate (less than 30 seconds)||Ink is dry to the touch after printing. However, it takes 24 hours before it cures and becomes durable.|
|Lamination feasibility||Pressure sensitive; cold lamination only.||A vinyl-based film that contains a UV absorbent is recommended for lamination purposes. For anti-graffiti purposes, use a fluoridebased film (i.e. Tedlar). For use in direct sunlight, avoid polyester or polycarbonate film.|
|Surface adhesion||Flat surfaces only||For best results, apply the adhesive to a clean, flat surface.Test it before applying it to the final print. Stretching the adhesive is not recommended, as the paper may shrink over time.|
|Adhesive backing||Re-positionable||Removable adhesive back provides enough strength and durability for outdoor usage. However, strength will decrease with increased re-positioning.|
*"Estimated Price" is the estimated U.S price. Dealer Prices may vary. All prices are in U.S. Dollars.