Epson iProjection for iOS - Direct Wireless Connection Setup


Setting up a Direct Wireless Connection
Setting up a Direct Wireless Connection Using a QR Code


Setting up a Direct Wireless Connection

Before setting up a direct wireless connection, make sure that both your iOS device and Epson projector have Wi-Fi enabled. See your projector documentation for more information on enabling your product's Wi-Fi connection.

  1. Tap the Settings icon on your iOS device's Home screen.



  2. Tap Wi-Fi to open the Wi-Fi Networks menu.



  3. Tap your projector's SSID in the list of available wireless networks.

    Note: If you don't know your projector's SSID, you can find this information in the Network section of the projector's menu or by pressing the LAN button on your projector's remote control. See your projector documentation for more information.



  4. Return to your iOS device's Home screen and open the iProjection App by tapping the iProjection icon.



  5. Tap Projector to open the Select Projector menu.



  6. Tap the name of your projector in the list of available projectors.

    Note: If your product doesn't appear in the list, tap Other. Enter your projector's IP address in the IP Address field. If you don't know the IP address, you can find this information in the Network section of the projector's menu or by pressing the LAN button on your projector's remote control. See your projector documentation for more information.

  7. Tap OK when prompted to confirm the connection to the projector.
Your iOS device and Epson projector are now connected. See the Using the iProjection for iOS App page for more information.


↑ Back to top ↑



Setting up a Direct Wireless Connection Using a QR Code

You can display a QR code on your projector's display to quickly enable a wireless connection with your iOS device. Before setting up a direct wireless connection, make sure that both your iOS device and Epson projector have Wi-Fi enabled. See your projector documentation for more information on enabling your projectorís Wi-Fi connection and displaying a QR code.

  1. Tap the iProjection icon on your iOS device's Home screen.



  2. Tap Projector to open the Search Projector menu.



  3. Tap Read QR code.



  4. Point your device's camera at the QR code on your projector display; the QR code is read automatically.

  5. Tap OK to register your projectorís Wi-Fi profile.

  6. Tap Install to install your projectorís Wi-Fi profile.

  7. Tap Install Now at the Unsigned Profile notification.

  8. Tap Done to exit the Profile Installed screen.

  9. Tap OK to confirm the connection to the projector.

  10. Note the projector network name (SSID) shown on your device's screen.

  11. Return to your iOS deviceís Home screen and tap the Settings icon.



  12. Tap Wi-Fi to open the Wi-Fi Networks menu.



  13. Tap your projector's SSID in the list of available Devices.

Your iOS device and Epson projector are now connected. See the Using the iProjection for iOS App page for more information.


↑ Back to top ↑