PowerLite 1825 Multimedia Projector

Selected FAQ

Q:
How do I connect a monitor to the projector so I can simultaneously view images on the monitor and from the projector?
A:
Make sure the projector and computer are turned off. Disconnect your monitor cable from your computer’s video port and connect it to the projector’s Monitor Out port. Then connect the VGA computer cable that came with your projector to your computer’s video port and to the projector’s Computer1 port. (Do not connect it to the projector’s Computer2 port; this will not work.)

If your image colors look wrong, try changing the Computer1 Input setting to RGB.

Note: Some LCD monitors may not be able to display the image correctly. If you have trouble displaying the image, connect a multiscan monitor. If you’re projecting computer images, make sure the computer’s refresh rate is set to 65 Hz or greater.
Published: February 25, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page