PowerLite 1825 Multimedia Projector

Selected FAQ

Q:
Can I connect external speakers to the projector?
A:
You can output sound to external speakers with built-in amplifiers. To connect external speakers, follow these steps:

  1. Locate the appropriate cable to connect your speakers.

    Depending on your speakers, you may be able to use a commercially available audio cable with a stereo mini-jack connector on one end and pin jacks on the other end. For some speakers, you may have to purchase a special cable or use an adapter.


  2. Connect the stereo mini-jack end of the audio cable to the Audio Out port on the projector.




  3. Connect the other end of the cable to your speakers.


The projector’s internal speaker system is disabled while sound is output to external speakers. You can use the remote control to adjust the volume.
Published: February 25, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page