PowerLite 400W Multimedia Projector

Selected FAQ

I replaced the projection lamp, but I still see the message Replace the Lamp. How do I clear this message?
You need to reset the lamp usage timer.

  1. Connect the power cable and turn on the projector.

  2. Press the Menu button on the projector or remote control.

  3. Select the Reset menu, then select Reset Lamp Hours and press Enter.

  4. When you see a confirmation screen, select Yes and press Enter.

  5. Press Esc to return to the main menu or the Menu button to exit the menu system.
The lamp usage timer shows 0H until you’ve used the lamp for at least 10 hours.
Published: March 27, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page