Epson Stylus NX200 All-in-One Printer

Support Links
Epson Stylus NX200 All-in-One Printer Support Drivers & Downloads FAQs for this Product Troubleshooting Guide Manuals Contact Support
Quick Links
More on this Product Register Your Product Buy Ink for this Product User Replaceable Parts Epson Recycling Program
Weekly Specials from EpsonStore.com

News & Alerts

Selected FAQ

Q:
What can I do about paper feed problems?
A:
Check the following:

  • If paper doesn’t feed, remove it from the sheet feeder. Reload it against the right side, behind the tab, then press in the tab on the left edge guide and slide it against the paper. Make sure the paper is not above the arrow mark inside the edge guide.


  • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.


  • If the paper doesn’t eject fully, you may have set the wrong paper size. Press the Stop button, then raise the scanner and remove the paper. Select the correct paper size before you reprint.


  • If it’s wrinkled when it ejects, the paper may be damp or too thin. Load new paper.


  • Make sure you use new, smooth, high-quality paper that is not curled, creased, old, or too thin. Load it printable side up.


  • Don’t load hole-punched paper.


  • Don’t load more than the recommended number of sheets. If you’re printing on both sides of the paper, try loading fewer sheets.


    • Paper type
    Load up to
    this many sheets
    Plain paperApproximately 120
    Epson Bright White Paper
    Epson Presentation Paper Matte    		Approximately 80
    Epson Photo Paper Glossy
    Epson Premium Photo Paper Glossy
    Epson Ultra Premium Photo Paper Glossy
    Epson Premium Photo Paper Semi-gloss    		20
    Epson Premium Presentation Paper Matte
    Epson Premium Presentation Paper Matte Double-sided
    Epson Photo Quality Self-adhesive Sheets
    Epson Iron-on Cool Peel Transfer Paper    		1


  • If the paper jams, do the following:


    1. Try turning the Epson Stylus NX200 Series off and then back on, to eject the jammed paper.

    2. Gently pull any jammed paper out from the output tray or sheet feeder.


      3. If that doesn’t work and paper is stuck inside, turn off the Epson Stylus NX200 Series. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus NX200 Series back on.
Published: September 10, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page
Sign up for exclusive deals & offers
Thank you for signing up!

Keep an eye out for our great offers and updates.

Oops, it looks like the system is down. Please try again later.

Stay in the loop with Epson email notifications

Sign Up Now