Epson Stylus NX200 All-in-One Printer

Selected FAQ

The colors in the image on my monitor do not match the output from my Epson Stylus NX200 Series. What is wrong?
Your monitor and the Epson Stylus NX200 Series use different technologies to represent colors, so your printed colors can’t match your screen colors exactly. Try increasing your monitor’s color palette to view a greater range of colors, and then try the following:

  • Make sure your Windows, Mac OS X 10.3 and 10.4, or Mac OS X 10.5 printer software is not set to Black Ink Only.

  • The print head nozzles may need to be checked then cleaned.

  • The ink cartridges may be old or low on ink, and you may need to replace them.

  • Try turning off Fix Photo in the Windows printer software.

  • With Mac OS X 10.3 and 10.4 or Mac OS X 10.5, try using Automatic mode.

  • Try changing the Gamma setting in your Windows, Mac OS X 10.3 and 10.4 or Mac OS X 10.5 printer software.

  • Your printed colors can never exactly match your on-screen colors. However, you can use a color management system to get as close as possible. Try using the ICM (Windows) or ColorSync (Mac OS X 10.3 and 10.4) setting.

    In Mac OS X 10.5, you can select ColorSync from the Color Matching pop-up menu.

  • For best results, use genuine Epson ink and paper.

  • After you print, the colors on your printout will take some time to set as the ink dries. During this time, the colors may look different than you expect. To reduce the drying time, avoid stacking your prints on top of each other.
Published: September 10, 2008

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page