PowerLite Pro G5200WNL Projector

Selected FAQ

Q:
How do I connect a monitor to the projector so I can simultaneously view images on the monitor and from the projector?
A:
Make sure the projector and computer are turned off. Disconnect your monitor cable from your computer’s video port and connect it to the projector’s Monitor Out port. Then connect a VGA computer cable to your computer’s video port and to the projector’s Computer1/Computer2 port.

If your image colors look wrong, try changing the Input Signal setting to RGB.

Note: Some LCD monitors may not be able to display the image correctly. If you have trouble displaying the image, connect a multiscan monitor. If you’re projecting computer images, make sure the computer’s refresh rate is set to 65 Hz or greater.
Published: June 4, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page