Epson Stylus Pro GS6000

Support Links
Epson Stylus Pro GS6000 Support Drivers & Downloads FAQs for this Product Manuals MSDS Contact Support
Quick Links
More on this Product Register Your Product Buy Ink for this Product User Replaceable Parts Epson Recycling Program
Weekly Specials from EpsonStore.com
Selected FAQ

Q:
How do I cut off my prints?
A:
Follow these steps to manually cut off your prints:
  1. Make sure READY appears on the LCD display.


  2. Press or to adjust the cutting position of the media, if necessary. (When you are using the Auto Take-Up Reel, you cannot feed the media backward.)


  3. Open the front cover.


  4. If you are not using the Auto Take-Up Reel, hold your print and pull slightly to remove any slack.


  5. Using a razor blade or other cutting tool, cut off your print by guiding the tool along the cutting groove in the post heater as shown.




    6. Warning: Do not place your fingers in the path of the cutting tool to avoid injuring yourself.

  6. If you are using the Auto Take-Up Reel, the scroller rotates to take up your printed media. To stop media take-up, set the switch on the top of the reel controller to OFF.
Published: September 15, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page
Sign up for exclusive deals & offers
Thank you for signing up!

Keep an eye out for our great offers and updates.

Oops, it looks like the system is down. Please try again later.

Stay in the loop with Epson email notifications

Sign Up Now