Epson Artisan 800 All-in-One Printer

Selected FAQ

How do I test the printer without using a computer?
You can run a nozzle check to help determine if the Artisan is operating properly. Follow these steps:
  1. Turn off the Artisan and your computer, if connected.

  2. Disconnect any connected USB cables.

  3. Load plain paper in the main tray.

  4. Press the On button to turn on the Artisan.

  5. Press Setup.

  6. Select Maintenance.

  7. Select Nozzle Check.

  8. Press Start.

  9. The Artisan begins printing the nozzle check pattern.

    If the nozzle check pattern page is not printed or sections are missing in the printout, the print head may need cleaning or the ink cartridge(s) may need to be replaced.

    If the nozzle check pattern page is printed correctly, the problem may be caused by your software settings, the interface cable, or your computer.
Published: February 3, 2009

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page