What should I do if the printout is blurry or smeared?
Check the following:
- Make sure your paper isn’t damp or curled, or loaded face down (the printable side should be face up). It’s usually brighter or whiter.
- Use a support sheet with special paper, or try loading your paper one sheet at a time.
- Make sure your paper meets the specifications.
- Make sure the paper Type or Media Type setting matches the paper you loaded.
- Use Epson papers to ensure proper saturation and absorption of genuine Epson inks. Also, make sure you’re using genuine Epson ink cartridges.
- Align the print head.
- Remove each sheet from the output tray as it is printed.
- Avoid handling printouts on glossy paper for a few hours to allow the ink to set. Let your prints dry separately for at least 12 hours before framing or placing them in protective sheets. If you need to stack them, place a sheet of plain paper between each print.
- Turn off High Speed mode in the Windows, Macintosh OS X 10.5 or Macintosh OS X 10.3 and 10.4 printer software.
- If you are using double-sided paper and printing heavily saturated or dark images on the front side of the paper, you may notice that smudges or marks appear on the front when you print the second side. If one side of the paper will contain a lighter image or text, print that side first to eliminate marks or smudging.
Updated: February 26, 2010
Thank you for your feedback.
Return to Main FAQs Page