Epson B-300 Business Color Inkjet Printer

Selected FAQ

Q:
How do I manually assign a static IP address to my printer?
A:
Do the following:

Windows
  1. Download and install the EpsonNet Config Utility from the Drivers & Downloads page for your printer.


  2. Select Start > Programs > EpsonNet > EpsonNet Config.


  3. Highlight your printer's name, then click Configuration.


  4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask and Default Gateway in the IP Address Setting section.




  5. Click Send


  6. Close EpsonNet Config.
Macintosh
  1. Download and install the EpsonNet Config Utility from the Drivers & Downloads page for your printer.


  2. Open the Hard Drive. Select Applications > EpsonNet > EpsonNet Config v3 > EpsonNet.


  3. Highlight your printer, then click Configuration.


  4. Select Basic (under TCP/IP) in the Device Properties window.


  5. Select Manual. Enter the IP Address, Subnet Mask and Default Gateway in the IP Address Setting section.




  6. Click Transmit.


  7. Close EpsonNet Config.
Published: June 17, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page