PowerLite 1725 Multimedia Projector

Selected FAQ

Q:
What should I do if only part of the picture is displayed or the image looks distorted?
A:
Check the following:

  • Press the Aspect button on the remote control to select a different setting. See Adjusting the Aspect Ratio.


  • If projecting from a computer, press the Auto button on the remote control. Also make sure the image Position setting is correct in the Signal menu.


  • Press the Esc button on the remote control to cancel the E-Zoom function.


  • You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information.


  • Make sure your computer’s resolution setting is correct. Ideally, it should be 1280 × 800 to match the projector’s native resolution for the PowerLite 1735W, or 1024 × 768 for the PowerLite 1725. If this option isn’t available, select one of the other compatible video formats.


  • Check the projector’s Resolution setting. Select Normal or Wide, depending on the size of your computer’s display panel.


  • Make sure your computer is not set to display an extended desktop.
Published: November 4, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page