PowerLite 1730W Multimedia Projector

Selected FAQ

Why isn’t there any sound?
Try the following:

  • Press the button on the remote control to turn up the volume.

  • If you’ve turned off the picture and sound, press the A/V Mute button on the remote control to turn them on again.

  • Make sure the A/V Mute slide (lens cover) is open.

  • If you’re using a DVD player or other video source, make sure its volume is not turned all the way down or muted. Also, make sure the cables are connected correctly. See Playing Sound Through the Projector.

  • If you’re using a computer audio cable, make sure it is connected to your computer’s headphone jack or audio out jack. Connect the other end to the projector’s Audio port when the computer’s video cable is connected to the Computer port.

  • If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted. In Windows, you may be able to check this by clicking the volume control in your Windows system tray (lower right corner of the screen). On a Mac, you may be able to adjust the volume from your menu bar (top right corner of the screen) or using the volume control function keys.

  • Try adjusting the Volume setting in the Setting menu. See Customizing Projector Features.
Published: November 5, 2008

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page