Epson WorkForce 600 All-in-One Printer

Selected FAQ

Q:
How do I manually assign a static IP address to my printer?
A:
Do the following:

Windows
  1. Download and install the EpsonNet Config Utility from the Drivers & Downloads page for your printer.


  2. Select Start > Programs > EpsonNet > EpsonNet Config.


  3. Highlight your printer's name, then click Configuration.


  4. Select Basic (under TCP/IP) and make sure Manual is selected. Enter the IP Address, Subnet Mask and Default Gateway in the IP Address Setting section.




  5. Click Send


  6. Close EpsonNet Config.
Macintosh
  1. Download and install the EpsonNet Config Utility from the Drivers & Downloads page for your printer.


  2. Open the Hard Drive. Select Applications > EpsonNet > EpsonNet Config v3 > EpsonNet.


  3. Highlight your printer, then click Configuration.


  4. Select Basic (under TCP/IP) in the Device Properties window.


  5. Select Manual. Enter the IP Address, Subnet Mask and Default Gateway in the IP Address Setting section.




  6. Click Transmit.


  7. Close EpsonNet Config.
Published: June 17, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page