PowerLite S6 Multimedia Projector

Selected FAQ

Q:
I see dark vertical bands in the projected image. What should I do?
A:
The Tracking and/or Sync settings may need to be adjusted. Press the Auto button on the remote control or Enter button on the projector to reset the projector’s tracking and sync settings.

If further adjustment is needed, you can fine-tune the Tracking and Sync settings manually using the Signal menu on the projector.

  1. Fill the screen with an image containing fine detail, such as a pattern to appear as your desktop background, or try projecting black text on a white background.


  2. Adjust the Tracking to eliminate vertical bands.


  3. Tracking Setting


  4. Adjust the Sync setting to increase the image sharpness.


  5. Sync Setting


Note: You must be projecting an image for this button to have any effect. The Auto button works only with computer images projected through the Computer (Component Video) port.
Published: September 18, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page