PowerLite S6 Multimedia Projector

Selected FAQ

Q:
How do I connect a monitor to the projector so I can simultaneously view images on the monitor and from the projector?
A:
Make sure the projector and computer are turned off. Make sure your computer’s VGA cable is connected to the projector’s Computer (Component Video) port. Then connect your monitor to the projector’s Monitor Out port.

If your image colors look wrong, try changing the Input Signal setting to RGB.

Note: Some LCD monitors may not be able to display the image correctly. If you have trouble displaying the image, connect a multiscan monitor. If you’re projecting computer images, make sure the computer’s refresh rate is set to 65 Hz or greater.
Published: September 18, 2008

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page