Epson Stylus NX510 All-in-One Printer

If you see a screen like this one, do one of the following:

• If you connected the printer wirelessly, verify that the printer is turned on and the green WiFi light on the printer’s control panel is on. Select Wi-Fi setup using the printer’s control panel, then click Next.



• If you created an Ad-Hoc wireless connection, do one of the following:
  
  
  • For Windows users: If your computer is connected to a network with an Ethernet cable, disconnect it. When setup is complete, reconnect your computer’s Ethernet cable.
  
  
  
  • For Macintosh users: If your computer is connected to a network with an Ethernet cable, you cannot set up your printer this way. See Wireless Network Installation or Wired (Ethernet) Installation to set up your printer.

If the solutions above do not help, check your wireless router or access point for any settings (such as AP Isolation, Client Isolation, or Privacy Separator) that would prevent wireless devices from communicating with each other. See the instruction manual for your router or access point for details.