PowerLite 410W Multimedia Projector

Selected FAQ

What should I do if only part of the computer image is displayed or the image looks distorted?
Check the following:

  • If you’re projecting from a computer or RGB video device, press the Enter/Auto button on the remote control. If this doesn’t work, you may need to adjust the Position setting in the Signal menu. See Adjusting the Input Signal for more information.

  • If you’ve enlarged part of the image using the E-Zoom button on the remote control, press the Esc button to cancel zooming and return to full display.

  • Try pressing the Aspect button on the remote control to select a different aspect ratio (ratio of width to height).

  • Make sure your computer’s resolution setting is correct and dual display is not activated. Ideally, the resolution should be 1280 800 to match the projector’s native resolution. If this option isn’t available, select another compatible video format. See Compatible Computer Display Formats.

  • You also may need to modify existing presentation files if you created them for a different aspect ratio. See your software documentation for specific information.
Published: April 22, 2009

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page