Epson WorkForce 615 All-in-One Printer

Selected FAQ

What information do I need to know before I install the WorkForce on my wireless network?
You’ll need to know the following:

  • Network name (SSID)

  • (This is the name of the wireless network that is set up on your router or access point.)

  • WEP Key or Passphrase

  • (This is the network security password.)
This information is stored in your network’s router, and may have been entered when the router was first set up. If you don’t have this information, contact the person who set up your network before you begin. You may also be able to log onto the router from your computer and check its setup screens. See your router’s instruction manual for details.

You should also write down whether the WEP key is in ASCII or hexadecimal format. If the WEP key is 5 or 13 characters, it’s ASCII. If it’s 10 or 26 characters, it’s hexadecimal. If your router gives you a choice of WEP keys to use, note which one is currently active. Usually the first WEP key is active, unless you’ve selected a different one.

If your passphrase contains upper- or lowercase letters, be sure to note them correctly.

The printer supports the following wireless security modes: WEP 64, WEP 128, and WPA-PSK.
Published: August 18, 2009

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page