| Selected FAQ |
Q: |
I have installed the printer software and set up the printer on the network, but the Scan to PC, Scan to Email, and Scan to PDF features do not work. What should I do?
|
A: |
To use these features, you must have the EPSON Event Manager software installed. If you do not have the EPSON Event Manager installed, go to the Drivers & Downloads page for your product to download and install the software.
Note: The first time the Event Manager Utility is installed, you must restart your computer in order for the features to work over the network. Click or Start > Control Panel > Security or Security Center > Windows Firewall. Click the Exceptions tab, (or click Change Settings if you cannot find the Exceptions tab.) Click the Add Program button, select Event Manager from the program list and click OK. Next confirm that the check box for Event Manager is selected in the Programs and Services list and click OK.
Click or Start > Programs or All Programs > Epson Software > Event Manager. Click the Button Settings tab, set all settings to use EPSON Scan and click Close.
Try using the Scan to PC, Scan to Email, or Scan to PDF features. If the steps above do not help, try enabling the UDP/TCP ports for EPSON Scan (port number 1865/3289) and EPSON Event Manager (port number 2968) on your router. If you are unsure on how to do this, contact your router manufacturer for instructions. |