PowerLite 825 Multimedia Projector

Selected FAQ

Q:
How do I play sound through the projector?
A:
To play sound through the projector, follow the steps below for your audio source:

Playing Computer Audio

For laptop and most desktop computers, use a 3.5 mm stereo mini-jack cable, which you can purchase from a computer or electronics store.
  1. Connect one end of the cable to the Audio1 or Audio2 jack on the projector.




  2. Connect the other end to your laptop’s  headphone jack or  audio-out jack, or your computer’s speaker or audio-out port.


Playing Sound from Video Equipment

For video equipment, use an RCA-style audio cable, which you can purchase from an electronics store.

Note: If you are using the component-to-VGA cable, you will need to connect an audio adapter to use the Audio1 or Audio2 jack.
  1. Connect the red and white plugs on one end of the cable to the L and R Audio jacks on the projector.




  2. Connect the red and white plugs on the other end to the corresponding color-coded audio output jacks on your video source.
You can also connect a dynamic microphone to the projector’s Mic port (see Connecting a Microphone) or play sound from the projector to external speakers with a built-in amplifier (see Connecting External Speakers).
Published: June 5, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page