PowerLite 84 Multimedia Projector

Selected FAQ

What should I do if I see static or noise in the image?
Check the following:

  • If you’re using a computer cable longer than 6 feet (2 meters), or an extension cable, the image quality may be reduced. Use a distribution amplifier for longer distances; you can purchase one from Epson. See Optional Accessories.

  • Keep your computer and video cables away from the power cord as much as possible to prevent interference.

  • The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is displayed simultaneously on your laptop computer and the projector, turn off the laptop’s LCD display.

  • Make sure the correct input signal is selected in the Signal menu.

  • Make sure the cables are securely connected at both ends.

  • If still images are jittery when you are projecting from a video source, turn on the Progressive setting in the Signal menu.

  • Select Noise Reduction in the Signal menu, then try selecting NR1 or NR2.
Published: May 8, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page