PowerLite 85 Multimedia Projector

Support Links
PowerLite 85 Multimedia Projector Support Drivers & Downloads FAQs for this Product Manuals Contact Support
Quick Links
More on this Product Register Your Product User Replaceable Parts Epson Recycling Program
Weekly Specials from EpsonStore.com

News & Alerts

Selected FAQ

Q:
I connected an Elmo HV-110XG Document Camera to my projector using a VGA HD15 connection and I just see a blue screen with the message No Signal when I try to display an image from the document table source. What should I do?
A:
Follow these steps:

  1. Make sure the Elmo HV-110XG Document Camera is turned on and connected to the projector.


  2. Turn on the projector.


  3. If the projector screen is flashing off and on, continue with step 4. If the projector screen is solid blue, skip to step 5.


  4. Connect the computer to the Elmo HV-110XG Document Camera’s HD-15 input port and switch the camera to Pass-Through mode. The projector screen should stop flashing and display the computer image.


  5. Access the projector’s Signal menu and change the Input Signal for the port being used by the camera (Computer1 or Computer2 port) from Auto to Component Video. The Elmo HV-110XG Document Camera should sync with the projector and display an image from the document camera bed.


  6. Once an image appears, change the input signal to RGB (this will eliminate any pink casts in the image), then to Auto.


  7. Switch the source on the Elmo HV-110XG Document Camera to the document table.


  8. When you’re finished, close the projector menu.


Note: The Elmo HV-110 Document Camera will retain its new settings even if you connect to a different projector.
Published: April 29, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page
Sign up for exclusive deals & offers
Thank you for signing up!

Keep an eye out for our great offers and updates.

Oops, it looks like the system is down. Please try again later.

Stay in the loop with Epson email notifications

Sign Up Now