Epson Stylus Scan 2000 All-in-One Printer

Windows System Requirements
- PC with at least a 486/66 MHz processor (Windows 98) or 486/25 MHz (Windows 95) (Pentium processor recommended)
- Microsoft Windows 95 or 98 (USB only with Windows 98 preinstalled - NO UPGRADES)
- At least 16MB of RAM (32MB or more recommended)
- At least 50MB of free hard disk space (100MB recommended)
- VGA or better display adapter and monitor (24-bit color recommended)
- Double-speed (2x) CD-ROM drive for installing the software (quad-speed [4x] or faster recommended) Your system should have one of the following interfaces: (USB recommended):
- Available USB port or hub connection, with shielded USB "AB" interface cable, from Series A (computer) to Series B (EPSON Stylus Scan), up to 6.5 feet (2 m) long
- Available parallel port with a high-speed, bidirectional, IEEE-1284-compliant parallel cable (6 to 10 feet long). The EPSON Stylus Scan cannot be used with a switch box or a pass-through port (for example, on a Zip drive). The cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics compatible connector for the EPSON Stylus Scan.