PhotoPC 800 Digital Camera

Selected FAQ

You get a "The Camera Is Not Responding" error message when you're using your PhotoPC 800 software with the camera connected to your computer.
Make sure the cable is connected correctly as described in Chapter 6. Also make sure your camera dial is not turned Off and the batteries have power. Check the serial port settings in your Image Expert or EPSON Photo!3 software. You may need to change the Port and Speed serial connection settings to Auto. If you were able to use the camera with the computer previously and then changed or added other settings on our system, you may have a COM port conflict. Try using a different COM port or reconfiguring the COM port settings. (See your Windows documentation for instructions.) If you were not able to use the camera with your computer previously, you may have an inoperable serial cable. Try using another cable.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page