LQ-950 Impact Printer

The LQ-850, LQ-950 and LQ-1050 have two 8-position DIP switches.
These switches are located at the rear of the printer.

Country	SW 1-1	SW 1-2	SW 1-3
USA	ON	ON	ON
France	ON	ON	OFF
Germany	ON	OFF	ON
United Kingdom	ON	OFF	OFF
Denmark	OFF	ON	ON
Sweden	OFF	ON	OFF
Italy	OFF	OFF	ON
Spain	OFF	OFF	OFF

Switch	ON	OFF
SW 1-4	Graphic Characters	Italic Characters
SW 1-5	Unidirectional Graphics	Bidirectional Graphics
SW 1-6	Not Used	Not Used
SW 1-7	CSF Enabled	CSF Disabled
SW 1-8	0K Input Buffer User-Defined Characters Enabled	6K Input Buffer User-Defined Characters Disabled
SW 2-1	12" Page Length	11" Page Length
SW 2-2	1" Skip over Perf	Skip over Perf Inactive

Interface/Parity	SW 2-3	SW 2-4
Parallel	OFF	OFF
Serial/Even	OFF	ON
Serial/Odd	ON	OFF
Serial/None	ON	ON

Baud Rate	SW 2-5	SW 2-6
9600	OFF	OFF
*4800/19200	ON	OFF
1200	OFF	ON
300	ON	ON

Switch	ON	OFF
SW 2-7	Tear Off Mode ON	Tear Off Mode OFF
SW 2-8	CR Produces CR + LF	CR Only

*NOTE - Baud rate of 19200 is available with N9xxxx firmware only.