PowerLite 1716 Multimedia Projector

Selected FAQ

Part of my image is blurred or out of focus. What should I do?
Try the following:

  • Adjust the focus using the focus ring. See Focusing and Zooming Your Image.

  • Make sure the projector is facing the screen squarely, to eliminate the need for keystone correction.

  • There may be dirt or smears on the lens. See Cleaning the Lens.

  • Make sure the projector is within the proper range (2.1 to 27.1 feet) from the screen.

  • Make sure the input signal setting on the Signal menu matches the signal from the connected device. See Adjusting Signal Settings.

  • Make sure the lens is not fogged by condensation. If you’ve just moved the projector from a cold environment, wait a couple of minutes before using it.

  • Adjust the Sharpness setting on the Image menu. See Adjusting the Image.

  • If you’re projecting from a computer, you may need to adjust the Tracking and Sync settings. See Adjusting Signal Settings.
Published: November 20, 2009

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page