PowerLite 1716 Multimedia Projector

Selected FAQ

Q:
Why isn’t there any sound?
A:
Try the following:

  • Press the  button on the projector or the remote control to turn up the volume.


  • Make sure A/V Mute is not enabled. (The A/V Mute button on the remote control may have been pressed.)


  • Make sure the A/V mute slide (lens cover) is open.


  • If you’re using a DVD player or VCR or other video source, make sure its volume is not turned all the way down or muted. Also, make sure the cables are connected correctly. See Playing Sound Through the Projector.


  • Make sure the audio cable is connected securely at both ends. For computer audio, connect the cable to your computer’s  headphone jack or  audio out jack.


  • If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted. In Windows, you may be able to use the volume control in your Windows system tray (lower right corner of the screen). On a Mac, you may be able to adjust the volume from your menu bar (top right corner of the screen) or via the volume control function keys.


  • If you are using the projector’s internal speaker, make sure the EasyMP Audio Out option is set to Internal.


  • If you are using external speakers, you need to set the EasyMP Audio Out option to External. See Connecting External Speakers or Customizing Projector Features for more information.


  • Try adjusting the Volume setting in the Settings menu. See Customizing Projector Features.
Published: November 20, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page