LQ-2080 Impact Printer

Selected FAQ

When I try printing a Custom or User Defined paper size from Windows the printer prints the first page, then ejects about a page and a half and starts to print the second page. How can I set the printer to the correct paper length?
If you are in Windows 3.x or Windows 95 or 98 using the ESC/P2 printer driver, you will not be able to choose a User Defined page size. The ESC/P2 drivers do not support User Defined page sizes.To use a User Defined page size, you will need to change your printer driver to an ESC/P printer driver such as the LQ-1050, LQ-1010, LQ-2550, LQ-2500, or the LQ-1000. If you are in Windows 95 or 98, you can use Microsoft's LQ-1070+ ESC/P2 printer driver. The Windows 95 or 98 ESC/P2 drivers do support User Defined sizes. The above procedures apply any time you specify a User Defined page size such as checks, small envelopes, or sheet fed labels, to name a few.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page