Epson LQ-1070+

Selected FAQ

I'm trying to print a 3.5-inch wide by 1-inch long label. I set the printer up for a User Defined page size and it prints the first label, then the paper advances about a page and a half and prints the next label. How can I set the printer up to print one label after another from Windows?
If you are in Windows 3.1x using an ESC/P2 printer driver, you will not be able to choose a User Defined page size. The ESC/P2 drivers do not support User Defined page sizes. To use a User Defined page size, you will need to change your printer driver to an ESC/P printer driver such as the LQ-850/1050, LQ-510/550/1010, LQ-200, LQ-500, LQ-860+/1060+, LQ-2550, LQ-800/1000, or LQ-1500. If you are in Windows 95 or 98, you can use Microsoft's LQ-570, LQ-570+, LQ-870, LQ-1070, LQ-1070+, LQ-1170 and LQ-2170 ESC/P2 printer driver. The Windows 95 ESC/P2 drivers do support User Defined sizes. The above procedures apply any time you specify a User Defined page size such as checks, small envelopes, or sheet fed labels, to name a few.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page