LQ-1010 Impact Printer

The LQ-1010/AP-4500 has two 8-position DIP switches. These switches are
located at the panel of the printer under a small access door.

Country	SW 1-1	SW 1-2	SW 1-3
USA	ON	ON	ON
France	ON	ON	OFF
Germany	ON	OFF	ON
United Kingdom	ON	OFF	OFF
Denmark	OFF	ON	ON
Sweden	OFF	ON	OFF
Italy	OFF	OFF	ON
Spain	OFF	OFF	OFF

Font	SW 1-4	SW 1-5
Roman	OFF	OFF
San Serif	ON	OFF
Slot	OFF	ON
Draft	ON	ON

Switch	ON	OFF
SW 1-6	Condensed	Normal
SW 1-7	Graphic Characters	Italic Characters
SW 1-8	CSF Enabled	CSF Disabled
SW 2-1	12" Page Length	11" Page Length
SW 2-2	Tear Off Mode ON	Tear Off Mode OFF
SW 2-3	1" Skip over erf	Skip over Perf Inactive
SW 2-4	CR Produces CR + LF	CR Only
SW 2-5	8K Input Buffer	1K Input Buffer
	User-Defined	User-Defined
	Characters Disabled	Characters Enabled
SW 2-6	Bidirectional Graphics	Unidirectional Graphics

Character Pitch	SW 2-7	SW 2-8
10 Pitch	OFF	OFF
12 Pitch	ON	OFF
15 Pitch	OFF	ON
Proportional	ON	ON

Note: Unidirectional graphics is the printer default. Placing
switch 2-6 in the ON position allows selection of
Bidirectional graphics after an ESC U O is sent.