FX-1180+ Impact Printer

Selected FAQ

Q:
How do I change the lock-out mode setting?
A:
You can select which printer functions you want to be locked while lock-out mode is on. Follow these steps:
1. Make sure paper is loaded and the printer is turned off.
2. Turn on the printer while holding down the LF/FF and Pause buttons. The printer enters the lock-out setting mode and prints the instructions. (You'll need three sheets of A4 or letter size single-sheet paper or three pages of continuous paper that is at least 279 mm [11 inches] long and 210 mm [8.3 inches] wide.)
3. Follow the instructions to change the settings as desired.
4. Turn off the printer.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page