LX-300+ Impact Printer

Selected FAQ

Q:
I'm printing serial, my baud rate is at 9600, and intermittently the printer will lose data. What can I do to correct this?
A:
If you are using XON/XOFF protocol, the XOFF signal may not reach the printer in time to delay data transmission which would result in an overflow and loss of data. If you can use a DTR setting, change XON/XOFF to DTR. If you must use XON/XOFF, try decreasing the baud rate.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page