Epson Stylus Color 880i - Graphite Cover with Ice Case

Selected FAQ

Q:
Is there a printer self test to determine if a problem is caused by the printer?
A:
You can run a self test on the printer to determine whether a problem comes from the printer or some other source. Follow these steps to run the printer check:
1. Make sure both the printer and computer are turned off.
2. Disconnect the interface cable from the printer.
3. Make sure paper is loaded in the printer.
4. Hold down the Load/Eject button, then press and release the power button. Continue holding down the Load/Eject button until the power light starts to flash, then release it. The printer prints one page showing its ROM version number, ink counter, and a nozzle check pattern. If the pattern has gaps in its dots, you need to clean the print head.
5. To end the check, turn off the printer after it prints the check page. Then reconnect the interface cable and turn on your printer and computer. If the check page prints, the problem probably lies in your software settings, the interface cable, or your computer. If the check page doesn't print, you should contact EPSON technical support.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page