Epson Stylus Photo 785EPX Ink Jet Printer

Selected FAQ

Q:
How do I print a BorderfreeTM or borderless print when using Epson Borderless specialty papers with my Epson Stylus Photo 785EPX printer using ArcSoft PhotoImpression?
A:
This printer supports 4" x 6", 5" x 7", 8" x 10", and letter size (8.5" x 11") Borderless photos. Load your paper in the paper support tray. (Note: thicker media types, like photo papers are recommended for borderless printing. Thinner type papers, like Epson Photo Quality Ink Jet Paper or plain papers, are not recommended for Borderless prints).
- Load your paper in the paper support tray (Note: thicker media types, like photo papers are recommended for borderless printing. Thinner type papers, like Epson Photo Quality Ink Jet Paper or plain papers, are not recommended for Borderless prints).
- Within the Photo Impression application, after importing the picture / selecting the album / editing the picture, and you are ready to print...
- Select the photo you would like to print.
- Click the "Print" icon button
- Click the "Image Printing" icon button located at the bottom of the screen. Then click the "Center Photo" check box located on the right side of the screen. Select the appropriate Landscape or Portrait orientation
- Click the "Printer Setup" icon button In Windows:
- Click the Properties button. Select the correct Media Type. Then Select the Paper Tab and Click on the "No Margin" check box to select it, and Select the appropriate Paper Size.
- Click OK
- Click OK again in the Print Setup dialog box.
- Click the Auto Crop Function icon on the right side of the screen (guide the slider bar to the left if the image dimension is less than the paper size)
- Click the Print button in lower left-hand corner of the screen to start printing In Macintosh:
- Click "Options" button, then Select the correct Media Type. Select "Auto Sheet Feeder" as your Paper Source. Then Click on the "No Margin" check box to select it, and Select the appropriate Paper Size.
- Click OK
- Click OK again in the Print Setup dialog box.
- Click the Auto Crop Function icon and guide the slider bar to the left if the image dimension is less than the paper size
- Click the Print button in lower left-hand corner of the screen to start printing Caution: Not all software applications resize images in the same way. Some applications don't allow for resizing, others may say they are resizing the image to 8x10 but in actuality they may create an image just short of 8" x 10". As long as the software application can accurately size the image file to the minimum width and length of the desired output size (4" x 6", 5" x 7", 8" x 10", 8.5" x 11"), then the driver (with the proper paper size and paper source settings) can produce a perfect borderless print in these sizes. For example, If the image is resized in the software to 7.8" x 10", the image will not print to the edge of an 8" x 10" sized paper, and instead will have borders on two sides. However, if the image is resized to 8" x 10.2" you can achieve the borderless print. Film Factory software can resize the image precisely with the proper print size and ratio options selected, and can perform this resizing automatically for multiple images at a time. It is recommended that if you are printing many images at one time, and they require resizing, that you use Epson Software Film Factory, or use a batch print process within Adobe Photoshop versions which support batch processing.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page