Epson Stylus Color 670 Ink Jet Printer

Selected FAQ

What are the system requirements for using this printer?
PC Compatible
- An IBM (r) compatible PC with at least a 486/66 MHz (for Windows (r) 98) or 486/25 MHz (for Windows 95 or Windows NT (r) 4.0) processor (Pentium (r) processor recommended)
- VGA, Super VGA, or better display adapter and monitor
- Windows 95, Windows 98, or Windows NT 4.0
- At least 32MB of RAM (64MB recommended)
- At least 100MB of free hard disk space (200MB recommended)
- CD-ROM or DVD drive for installing the printer software
- A high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics (r) compatible connector for the printer
- USB connection: a computer running Windows 98 with a Windows 98 compliant USB port and a shielded USB "AB" cable up to 6.5 ft (2 meters). Caution: Using an improperly shielded USB cable - especially more than 6.5 feet (2 meters) long - may cause the printer to malfunction.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page