Epson Stylus Photo 870 Ink Jet Printer

Selected FAQ

The printer won't feed paper. What should I do?
Power the printer on and press the Load/Eject button to see if paper will load. If no paper loads, make sure the paper isn't curled or creased, isn't too old, isn't loaded above the arrow on the left edge guide, and that the paper isn't jammed in the printer. If the Paper Out light is on solid, reload the paper, making sure the paper edge guide is adjusted to fit the paper's width, and then press the Load/Eject button again to see if the paper will now load. If the Paper Out light is flashing, turn the printer off, reload the paper, turn the printer back on, and try pressing Load/Eject again to see if the printer will now successfully load the paper. If the printer still will not load paper, power the printer off, remove the printer cable, and make sure all of the packing materials are removed. If the problem persists, the printer may need to be sent in for service and you should call the EPSON Connection for technical support and further assistance.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page