Epson Stylus Pro 5500 Print Engine

Selected FAQ

Q:
I’m getting fine white banding lines in all my images. What can I do to eliminate these lines?
A:
First, check your driver settings and make sure the media type setting matches your paper type and that the appropriate print quality (resolution) is selected for your document. If the settings are correct, make sure your paper is loaded with the printable side facing the correct way. In the tray or front manual feed slot, load paper face-down. In the rear manual feed slot, load paper face-up.

If you still see banding, print a nozzle check pattern from the Utility menu in the driver. Each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. If there are any gaps in the nozzle pattern, run a cleaning/nozzle pattern cycle. You may need to run up to 7 cleaning/nozzle pattern cycles to completely clean the print head. If the nozzle pattern prints correctly, run the print head alignment utility using Epson coated paper and check it for misalgnment with a loupe or magnifying glass.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page