Epson Stylus Color 777 Ink Jet Printer

Selected FAQ

Q:
What are the system requirements for using this printer?
A:
PC Compatible Requirements
- An IBM (r) compatible PC with at least a 386/25 MHz for Windows 3.1, 486/25 MHz (for Windows 95 or Windows NT (r) 4.0) or 486/66 MHz (for Windows 98 or Windows 2000) Pentium (r) or better processor
- Microsoft (r) Windows 95, Windows 98, Windows NT 4.0, or Windows 2000
- 16MB of RAM (32MB for Windows 95 or Windows 98 recommended; 64MB recommended for Windows NT 4.0 or Windows 2000)
- 50MB of free hard disk space (100MB or more recommended)
- VGA or better display adapter and monitor
- CD-ROM or DVD drive for installing the printer software
- Parallel connection: a high-speed, bidirectional IEEE 1284 compliant parallel cable, up to 10 feet long (3 meters); the cable must have a D-SUB, 25-pin, male connector for your computer, and a 36-pin, Centronics (r) compatible connector for the printer.
- USB connection: a computer running Windows 98 or Windows 2000, with a Windows-compliant USB port and a shielded USB "AB" cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB cable-especially a cable more than 6.5 feet (2 meters) long-may cause the printer to malfunction. Apple Macintosh Requirements
- An Apple (r) iMac (tm) series or Power Macintosh (r) G3 or G4 with USB port
- For iMac: Mac (r) OS 8.5 or later (Mac OS 8.5.1 or later recommended)
- For Power Macintosh G3 or later: Mac OS 8.5.1 or later If your iMac is running OS 8.1, you need to upgrade your operating system before installing your printer software. To find out which operating system your iMac is running, select About This Computer from the Apple menu. If you're running OS 8.5 or 8.5.1 on your iMac, Apple recommends that you install iMac Update 1.1. Download the update for your system from Apple at http://asu.info.apple.com. Contact Apple if you have problems installing an update.
- 16MB of available RAM (more recommended)
- 50MB of free hard disk space (100MB recommended)
- VGA display or better
- CD-ROM or DVD drive for installing the printer software
- A shielded USB "AB" cable up to 6.5 feet (2 meters) long. Using an improperly shielded USB cable-especially a cable more than 6.5 feet (2 meters) long-may cause the printer to malfunction.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page