Epson Stylus C40S Ink Jet Printer

Selected FAQ

Is there a way to determine if a problem is caused by the computer or printer?
You can run a printer operation check to determine whether the problem comes from the printer itself or some other source. If the results are satisfactory, the problem lies in your software settings, the interface cable, or your computer. If the check page does not print correctly, you have a problem with your printer. Please see the following suggestions for possible solutions.
- Make sure both the printer and computer are turned off.
- Disconnect the interface cable from the printer.
- Make sure paper is loaded in the printer.
- Hold down the Maintenance button, and turn on the printer.
- Release the Maintenance button when a test page begins printing. The printer prints its ROM version number and a nozzle check pattern. If the check page doesnt print, then the printer may have a problem which needs to be serviced.
- To end the check, turn off the printer. Then reconnect the interface cable and turn on your printer and computer.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page