Epson Stylus C80WN Ink Jet Printer

Selected FAQ

Q:
How do I install my ink cartridge for the first time?
A:
Turn the printer on. The ink cartridge holders will move to the installation position. Lower the printer_s output tray and open the cover. Use the ink cartridges packed with your printer the first time you install ink cartridges or your printer won_t charge properly. Shake each ink cartridge four or five times then unwrap the ink cartridges. Don_t remove the cartridge labels or ink may leak. Lower each ink cartridge into its holder. The color of the cartridge label should match the color of the sticker above the holder. Gently push each ink cartridge down until it clicks into place. All four cartridges must be installed in the printer. Press the ink change button and close the printer cover. Ink charging takes about 90 seconds and is complete when the power light stops flashing. It is important not to turn off the printer until the power light stops flashing or poor quality printouts may occur.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page