Epson Stylus Color 200 Ink Jet Printer

Selected FAQ

I am getting the message "Disk is full" on my PC screen whenever I send something to print. How can I clear this?
In the Program Manager, go to the Control Panel, select Printers, and check to see if you are printing to LPT1.DOS. If you are printing to LPT1.DOS, click on Connect and change the setting to LPT1:Local port. Check the Spool Manager3 to make sure the correct settings are enabled. Delete any queued print jobs. If the printer is Held, select Queue, then choose Setup. Make a note of the spool directory, choose "Spool to local printer," enable "Use Print Manager for this port," then click OK. To clear the queue, click once on the Stylus COLOR 200, select Queue, then click on the word "Hold" to remove the check mark. Try printing again from Windows. If the problem persists, make sure that the printer is spooling in a directory other than C:\WINDOWS, C:\WINDOWS\TEMP, C:\DOS, or any software application directory, by checking the spool directory specified in Spool Manager3. If the spool directory is listed as any of the preceding directories, create a unique spool directory on your root directory such as C:\COLOR, C:\SPOOL, or a directory name that you prefer. You can create a new directory from the File Manager in Windows or from the MS-DOS Prompt. Change the spool directory in the Spool Manager3 to the new directory in both the Options/Default Spool Directory and in the Queue/Setup. This normally corrects the problem.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page