Epson Stylus Color Pro-XL Ink Jet Printer

Selected FAQ

Q:
I am getting the message "Disk is full" on my PC screen whenever I send something to print from Windows. How can I clear this?
A:
Check to see if the Stylus Pro is set to Hold in the Epson Spool Manager. Delete any queued print jobs and remove the check mark from the word 'Hold' under the "Queue" menu and try printing again. If the printer was held, select Queue, then Setup. Note the Spool Directory, verify "Spool to local printer", enable Queue Print Manager and click on 'OK'. Clear queue, highlight Epson COLOR Stylus, select Queue and remove check mark from the word 'Hold'. This is the most probable solution. Try printing again from Windows. If the problem persists, delete all files with the extension .jnl or .tmp (*.jnl, *.tmp) from the spool directory. Make sure that it is spooling in a directory other than C:\WINDOWS\TEMP or C:\TEMP by checking the spool directory specified in spool manager. If the spool directory is C:\WINDOWS\TEMP or C:\TEMP, create a special spool directory C:\SPOOL (or a directory name that you prefer) off of the root directory from either FileManager or the DOS prompt. Change the default spool directory in spool manager to C:\SPOOL in both queue setup and options. Turn the printer and the PC off and back on and try printing again. This normally corrects the problem.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page