Epson Stylus Color II Ink Jet Printer

Selected FAQ

One of my colors is missing. What should I do?
Calibrate colors in the driver setup to the specific application or image. Set to Default and adjust from there. Perform self test (Press Load/Eject and power printer on) and check that seven colors are produced. If seven colors are not produced, perform default set mode (Press Economy/Condensed and power printer on) to inspect dots. If test print shows missing dots, perform two cleaning cycles; (COLOR Cleaning)-Press the PAUSE Button, then, Alt and Print Mode 'OR' (BLACK Cleaning) Press the PAUSE, then, Alt and Economy/Condensed. Run the self test again to see if printing has improved (Power on the Printer while holding down the Load/Eject-Button. If the self test is still missing one of the four colors, try replacing the ink cartridge. If the condition persists, have the printer sent in for repair.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page