Epson Stylus Color 1520 Ink Jet Printer

Selected FAQ

When printing from my Macintosh an error message comes up that says "The printer is not responding, ensure the printer is connected and on-line. Would you like to try again?". What should I do?
If your system version is 7.5.2, 7.5.1 or 7.5 and your computer is a PowerMac6100/60, PowerMac6100/66, PowerMac7100/66AV, PowerMac7100/80AV, PowerMac7200/90, PowerMac7200/120, PowerMac7500/100, PowerMac7600/120, PowerMac8100/80, PowerMac8100/80AV, PowerMac8100/100, PowerMac8115/110, PowerMac8500/120, PowerMac8500/132, PowerMac8500/150, PowerMac9500/120, PowerMac9500/132, PowerMac9500/150, Centris660AV, Quadra840AV the file SerialDMA Ver.2.0.2 should be installed in the extensions folder. To check whether SerialDMA Ver.2.0.2 is installed in your system, open the system folder and the Extensions folder, then check whether it is installed. To check the version number of the file, click the file and select Get Info from the File menu. If SerialDMA Ver.2.0.2 is not installed, drag it onto the Extension folder of your hard disk. The system will remind you that extensions need to be placed in the Extensions folder; click OK and SerialDMA Ver.2.0.2 will be copied. After the extension is in your system, you need to restart your Macintosh. Also, the Serial Port Arbitrator that ships as part of AppleTalk Remote Access conflicts with SerialDMA Ver.2.0.2 when running on Macintosh 7200, 7500, 8500 and 9500. Remove the Serial Port Arbitrator from the Extensions folder if installed. Also, verify your system meets the minimum system requirements. If you continue to experience this situation, please contact the EPSON Connection for further assistance.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page