Epson Stylus Color 1160 Ink Jet Printer

Selected FAQ

Q:
What are the system requirements for using this printer?
A:
PC Compatible
- An IBM compatible PC with at least a 486/66 MHz (for Windows 98) or 486/25 MHz (for Windows 95 or Windows NT 4.0) processor (Pentium processor recommended). USB requires Windows 98
- VGA, Super VGA, or better display adapter and monitor
- Windows 95, Windows 98, or Windows NT 4.0
- At least 16MB of RAM (32MB for Windows 95 or 98, or 64MB for Windows NT 4.0 recommended)
- At least 50MB of free hard disk space (100MB recommended)
- Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) for installing the printer software
- A high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics compatible connector for the printer
- For USB connection: a computer running Windows 98 with a Windows 98 compliant USB port and a shielded USB "AB" cable from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long. An Apple iMac series or Power Macintosh G3 with USB port
- For iMac: Mac OS 8.1 or later
- For Power Macintosh G3: Mac OS 8.5.1 or later If your iMac is running OS 8.1, you'll need to update your Mac OS ROM before installing your printer software. Download and install iMac Update 1.0 or later from Apple at http://swupdates.info.apple.com. Contact Apple if you have problems installing the update. If your iMac is running OS 8.5 or 8.5.1, do not install iMac Update 1.0. Instead, Apple recommends that you download and install iMac Update 1.1. To find out which operating system your iMac is running, select About This Computer from the Apple menu.
- At least 16MB of available RAM (32MB recommended)
- At least 50MB of free hard disk space (100MB recommended)
- VGA, Super VGA, or better display adapter and monitor
- Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) for installing the printer software
- A shielded USB "AB" cable from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page