Epson Stylus Color 1160 Ink Jet Printer

Selected FAQ

Q:
How can I print using Windows 3.x, DOS applications or from the DOS prompt with this printer?
A:
D4 Mode of the parallel interface must be disabled (OFF) in order to print from Windows 3.x or DOS. Take the following steps to set the D4 Mode.
1. Turn on the printer while holding down the Cleaning button.
2. The paper out light will start blinking.
3. Release the Cleaning button and immediately press the Load/Eject button and hold it for about 20 seconds.
4. The Paper Out, Color Ink Out and Black Ink Out LED's will light.
5. Release the Load/Eject Button.
6. Press the Cleaning Button and observe the LED conditions as follows to select the desired D4 Mode: Paper Out LED - ON = D4 Mode ON
Black Ink Out LED - ON = D4 Mode OFF
Color Ink Out LED - ON = D4 Mode AUTO NOTE: Be sure to set the D4 Mode to AUTO for normal operation.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page