Epson ActionLaser 1100 Printer

Selected FAQ

What driver should I use to print from Windows 95?
Microsoft provides Windows 95 drivers on the Windows 95 installation CD or setup diskettes. Epson does not provide separate drivers for Windows 95.If the Epson printer model is not listed among the Windows driver choices, you need to use the appropriate HP printer driver.

Since you are using Windows 95, you should install the printer's emulation which is the HPLJIII printer driver (32-bit).

This model emulates the HPLJIII. There are two changes that you will make to this driver.

1. Go to the HPLJIII properties section, go to the tab called, "GRAPHICS" select the option called, "DITHERING." Under this option select "ERROR DIFFUSION."

2. Under the tab called, "FONTS." Go to "TRUE TYPE FONTS." Select on this menu, the option called, "PRINT TRUE TYPE AS GRAPHICS."

3. Make sure that the port settings are set to LPT1, NORMAL, STANDARD, bi-directional or SPP only. The printer does not support ECP or EPP. Any changes to your printer port will have to be done in your system's BIOS. Refer to you Windows 95 manual or contact your computer vendor for assistance.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page