PowerLite Pro Cinema 9100 Projector

Selected FAQ

The  power light won’t come on. What should I do?
Check the following:

  • Make sure the Illumination setting on the projector is set to On. If the setting is off, the  power and  source lights on the projector are deactivated.

  • Make sure the projector is receiving power. Turn the projector off and unplug the power cord from the electrical outlet. Make sure the other end is securely connected to the projector and then plug the cord back into a different outlet and turn on the projector.

  • If a light is on or flashing, check the projector’s status.

  • Make sure the projector’s Main power switch is turn on.
Published: November 16, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page